LCD Display OverviewInformation ScreensSettings ConfigurationAdvanced InformationAdvanced SettingsModbus TablesChangelogG100HV Meter

Settings Configuration

Settings Access

1Press ENTER to open main menu
2Scroll to 'Settings' using UP/DOWN
3Press ENTER to access settings menu
4Use UP/DOWN to navigate settings

Setting 1: Address

Address: ->01
Language: English
Addr:Device RS485 communication address (slave ID)
Range:Valid addresses: 1 to 99
Default:Factory default: 1

Configuration Steps:

  1. Use UP/DOWN to adjust address value
  2. Press ENTER to save new address
  3. Press ESC to cancel without saving

Setting 2: Language

Language: ->English
Date: 12/05/24
Lang:Interface display language
Opts:Available: English, French, Spanish
Note:Settings saved immediately on selection

Configuration Steps:

  1. Use UP/DOWN to cycle through languages
  2. Press ENTER to confirm selection
  3. Press ESC to cancel

Setting 3: Date

Date: ->12/05/24
Time: 14:30
Format:Day/Month/Year format (DD/MM/YY)
Range:Valid dates only
Auto:Handles leap years automatically
Nav:Use LEFT/RIGHT to move cursor position

Configuration Steps:

  1. Use LEFT/RIGHT to move between DD/MM/YY
  2. Use UP/DOWN to change selected number
  3. Press ENTER to save date
  4. Press ESC to exit without saving

Setting 4: Time

Time: ->14:30
Address: 01
Format:24-hour time format
Range:Hours: 00-23, Minutes: 00-59
Note:Time updates immediately when saved
Nav:Use LEFT/RIGHT to move between hours/minutes

Configuration Steps:

  1. Use LEFT/RIGHT to select hours/minutes
  2. Use UP/DOWN to adjust values
  3. Press ENTER to save time
  4. Press ESC to cancel

💡 Important Notes

  • Settings are saved in non-volatile memory
  • Settings are retained through power cycles